11
6. Use the after sale accessory -- filter flushing tip, the arrow direction is the
water flow direction, insert the PE pipe in the quick joint.
7. Insert the active carbon filter into the filter flushing tip, tighten it by turning
anticlockwise, and open the water tap to flush the filter till it doesn't
discharge black water, for about 10min.
8. Install the clean filter in the product, hold the filter with the left hand and
enclosure of filter with the right hand, and insert it upwards in the filter,
tighten it by turning anticlockwise, the installation order is: PP sediment
filter → Active carbon filter.
PP CB
9. Remove the plug from the water inlet located on the back of the unit. To
do this press on the push connect ring that is behind the plug. Push the
open end of the PE Tubing into the water inlet. Make sure the PE Tubing
is tight and secure.
9. Remove the plug from the water inlet located on the back of the unit. To
do this press on the push connect ring that is behind the plug. Push the
open end of the PE Tubing into the water inlet. Make sure the PE Tubing
is tight and secure.
