Cosmed Quark CPET, User Manual

Page: 12 / 102

10 - Getting Started - Important Notices
10. The device should be used with a computer with electromagnetic compatibility, CE marking and low radiation emission displays
11. The PC connected to the device must be compliant with EN 60601-1 by means of an isolation transformer
12. Precautions regarding EMC should be taken prior to installation and can be noted in the section EMC
13. Portable and mobile RF communication equipment may interfere with the performance of the device
14. Only the cables and accessories supplied with the equipment should be used with the device. The use of any other accessories and/or cables may
result in increased emissions or decreased immunity of the equipment
15. The device should not be placed adjacent to or stacked either on top or under other equipment. If this is absolutely necessary, the device operation
must be verified to ensure normal operation The graphical symbols used with the device are described below:
Applied part type B (EN60601-1) Potential equalization node
Applied part type BF (EN60601-1) PC connection
OFF Connector for the RH/TA sensor
ON
TTL auxiliary input/output
Protective earth ground USB connector
Alternating current
HR probe connector
Refer to the instructions for use