Cosmed Quark CPET, User Manual

Page: 30 / 102

28 - Installation - Quark Installation

Quark Unit Rear Panel
Connection Description Quark Model
1. PNT/MIP-MEP/P0.1 port Pneumatic connection for X9 PNT and MIP-MEP/P0.1 PFT, SPIRO
2. Permapure sampling line port Connection for the sample line, luer lock, rotate clockwise to tighten PFT, CPET
3. Breathing alve connector Large connector for Breathing Valve Assembly PFT
4. DLCO cylinder connector Push connector with quick release for DLCO gas cylinder PFT
5. O
2
/CO
2
calibration cylinder connector Push connector with quick release for O
2
/CO
2
calibration gas cylinder PFT, CPET
6. Oxygen cylinder connector Push connector with quick release for O
2
gas cylinder PFT
7. Demand valve pneumatic connection Connection for demand valve for gas delivery from S/N 2014041001 PFT (newer)
8. Supplemental ground (earthing) Connection to ground the unit PFT, SPIRO, CPET
9. Dosimeter Port Connections for controlling delivery of medications to subject PFT, SPIRO
10. Medical air connector Push connector with quick release for medical air to control dosimeter
11. RS232 port for PC Serial connection to computer (COM Port) PFT, SPIRO, CPET
12. Temperature / Relative Humidity Port Connection for Temperature and Humidity Probe (external) PFT, SPIRO, CPET
13. USB-A port to PC USB connection to computer (printer style cable) PFT, SPIRO, CPET
14. Auxiliary USB port for HR Monitor USB connection (USB Drive connection) for Heart Rate Monitor Dongle PFT, CPET
15. Turbine flowmeter port Phone style connection for connection of Turbine Flowmeter(s) PFT, SPIRO, CPET
16. Reset button Button to reset system, power button is preferred method PFT, SPIRO, CPET
17. Auxiliary RS232 port – Ergometers Communication with Ergometers / accessories via RS232 PFT, CPET
18. Oximeter/PNT ROCC connector (for PNT ROCC, an
adapter is required) Connection for Oximeter(s) and the PNT Rocc PFT, CPET
19. Auxiliary TTL input/output port Auxiliary connection for input / output of TTL signals (ECG / Polar HRM) PFT, CPET
20. Port for the soda lime CO
2
absorber output (pre-
installed)
Luer lock connection for soda lime absorber, rotate clockwise to tighten PFT, CPET
21. Power cable plug Plug to insert appropriate power cord into PFT, SPIRO, CPET
22. Soda Lime CO
2
Absorber slot (pre-installed) Carbon Dioxide absorber holder PFT, CPET
1.
1
2
3
4 5 6
7
8 9 10
11 12 13 15 14 16 17 18 19
20
21
22