Cosmed Quark CPET, User Manual

Page: 72 / 102

70 - System Cleaning & Maintenance - Mixing Chamber Test
Item Adapter Adapter 3
When?
Before first use and immediately after use Before first use and immediately after use
Pretreatment Rinse the component in tap water at 22-40°C Rinse the component in tap water at 22-40°C
Manual Cleaning 1. Soak for 3 minutes in a mild detergent solution
(Cidezyme) at room temperature (>22°C). Using a
soft bristle brush, scrub the item submerged in the
cleaning solution during the 3 minutes
2. Wipe while rinsing for 5 minutes in a large volume of
water. Using a lint free towel or gauze, remove the
water in excess from the item
3. Inspect all surfaces and item features to ensure that it
is visibly clean, repeat Manual Cleaning if not
1. Soak for 3 minutes in a mild detergent solution
(Cidezyme) at room temperature (>22°C). Using a
soft bristle brush, scrub the item submerged in the
cleaning solution during the 3 minutes
2. Wipe while rinsing for 5 minutes in a large volume of
water. Using a lint free towel or gauze, remove the
water in excess from the item
3. Inspect all surfaces and item features to ensure that it
is visibly clean, repeat Manual Cleaning if not
Disinfection
1. Soak the component in disinfectant (Cidex OPA) at
room temperature (>22°C) for 12 minutes
2. Rinse three (3) times in a large volume of water for at
least 3-minutes for each rinsing cycle
3. Air dry / pat dry with towel
1. Soak the component in disinfectant (Cidex OPA) at
room temperature (>22°C) for 12 minutes
2. Rinse three (3) times in a large volume of water for at
least 3-minutes for each rinsing cycle
3. Air dry / pat dry with towel
Cleaning Time 30 minutes 30 minutes
Drying Time
2-3 hours 2-3 hours