Cosen C-620NC, Instruction Manual, Page: 57 / 122

4 ‐ 23
Hydraulic top clamps

The top clamp device composed of two clamps is installed on the
saw bow and on top of the rear vise before executing bundle
cutting.

Refer to Using Top Clamp for Bundle Cutting for operating
procedure on bundle cutting.
Height encoder
With this optional device, the operator can input work piece
width via HMI touch panel. When cutting begins and the blade
starts to descend, the panel will display the current blade height,
the blade descend speed and the cutting rate calculated by the
system.
The encoder is a high ‐ precision electronic device. It has been
factory ‐ adjusted before shipment. Please do not make any random
change to it.
Avoid high impact on the device.