Cosen C-620NC, Instruction Manual, Page: 47 / 122

4 ‐ 13
No Item Function Description
27
Cutting program setting
Press this button to directly enter the cutting job program
setup page.
A total of 100 cutting programs can be set.
28
Material cutting
reference
This 2 ‐ page reference chart lists out the required blade
speed and cutting rate for each different material.
29
PLC monitor Shows current PLC signals.
30
Error report Lists a historical report of the errors and the time of
occurrence as well as provides troubleshooting support. 6
pages in total.
Cutting status display & setup
When cutting is in operation, press to enter cutting status display and setup page.
Page 1 – cutting status display

This page shows the following information (from
top to bottom):

Current blade height

Press Height zero for 1 second to reset the
blade height to zero. Yellow blink icon
indicates that reset to zero function has
been turned on. Press saw bow down
button and saw bow will quickly descend to
lower limit position. When saw bow reaches
the lower limit position, this icon will turn to
grey, indicating blade height has reset to
zero.
After machine is turned off, saw bow
will descend while PLC and encoder are out
of power. After machine is restarted, please
reset the height to zero to have correct
blade height reading.

Feeding length (current feeding vise
position)

Blade speed

Current in ampere (optional)

Blade feed speed

Cut rate

Number of current cutting job/step in
operation

Preset quantity of current cutting job