Cosasco Checkmate DL, Reference Manual

Page: 47 / 71

CHECKMATE™ DL 39
Displaying RDC/ER-210 Data
on the Checkmate DL CHAPTER 8
Probe reading data stored on RDC/ER-210 can be transferred to the PC using
Corrdata Plus or the latest reading may be displayed on the Checkmate DL for
user convenience. For Corrosometer probes data includes the Tag ID, Metal
Loss, Corrosion Rate, Divisions and Check Readings, Alloy, Span, Temperature
(where applicable), number of Readings, and Interval. For Corrater probes
data includes Tag ID, Corrosion Rate, Imbalance, Temperature, Alloy, Multiplier,
number of Readings, and reading Interval.
From the Standby screen, press Disp (F2) to proceed to the Display Data By
display:
Display Data By
Curr
Probe ID Exit
Press Curr Probe (F1) to see the last viewed probe ID or press ID (F2) to select
the probe by ID.
If a Corrosometer probe is attached to the RDC/ER-210, following display will
appear:
ID: xxx xxxxxxxxxxxxx
Div: xxx Chk: xxx (xxx)
Temp: xxx C xx F xx
More Exit
Press More (F1) to proceed to the next display:
Alloy: xxxxxxxxx
Span: xxxx
xxxx Readings @ xxint
Exit
If a Corrater probe is attached to the RDC/ER-210, following display will appear:
ID: xxx xxxxxxxxxxxxx
Rate: xxx units
Imb: xxx Temp: xxx C
More Exit