Cosasco Checkmate DL, Reference Manual

Page: 29 / 71

CHECKMATE™ DL 21
Once the appropriate selections are made, the following display will appear
indicating the Checkmate DL was successfully con
fi gured. Press the Exit (F4)
key to return to the Standby screen:
Mate Con fi gured for
ID: xxx xxxxxxxxx
Exit
If OTHER is selected from the probe type selections on the Select Probe Type
display, the Checkmate DL will proceed to the Enter Probe Type display shown
below:
Enter Probe Type > <
(A thru G)
Type
Enter Clr List Exit
Enter A for Wire Loop type probes or enter B or C for Tube Loop/Strip Loop
type probes or enter D for Cylindrical type probes or E for Corrater probes or
F for Corrater Flush probes or G for High Sensitive Probes. If you are unsure
of the element type, this information can be found on the probe packaging,
etched on the probe body adjacent to the connector or in Table 5.1 Probe Type
Identi
fi cation.
Make the Probe Type selection and press Enter (F1). Following Enter Probe
Span display will appear if type A, B, C, or D is selected:
Enter Probe Span
> < mils
Enter Clear BkSp Exit
From the keypad, enter the span of the probe element in mils. The span in mils
is shown on the probe packaging or it can be found in Table 5.1.
If Type G for the Model 610 Atmospheric Probes is selected, the span is entered
in Angstroms, see the following Enter Probe Span display:
Enter Probe Span
> < Angstroms
Enter Clear BkSp Exit