2.11.1.
To enter HOME, LOCAL, and “1 PLUS 7” area codes
a.
Press
MENU
. The display will read “
Phone Setting
”
b.
Press the soft key under
ENTER
c.
Press
DOWN ARROW
until “
Area Codes
” appears in the display
d.
Press the soft key under
ENTER
. The
HOME
area code setting will be displayed.
e.
Press the soft key under
CHANGE
to change this setting
f.
Press
DOWN ARROW
to view the
LOCAL
setting
g.
Press the soft key under
CHANGE
to change this setting
h.
Press
DOWN ARROW
to view the
1 PLUS 7
area code settings.
i.
Press the soft key under
CHANGE
to change this setting
3.
MEMORY SETTINGS
3.1.
Memory Features
Your 2750 telephone can store up to 40 of your most often dialed numbers in its memory. The 40
numbers are stored into Personal Directory locations, which are dialed by pressing”#” followed by the
arrow buttons.
3.1.1.
Storing a hyphen into memory
You can store hyphens in your memory dial numbers for easy reading. To insert a hyphen into a
number you are storing, press
PAGE
. Each press of
PAGE
will insert a hyphen.
3.1.2.
Storing a dialing pause into memory
You can store a pause in a memory location for use with certain banking and long distance services.
You may also need to insert a pause between the access number and the telephone number if your
telephone is connected to a PBX or Centrex system. To insert a dialing pause into a number you are
storing, press
HOLD
. Each press of
HOLD
will insert a 1.5 second pause, represented by a “p” in the
display.
3.1.3.
Storing a flash into memory
You can store a flash into a memory location for use with certain custom calling services, such as Call
Waiting. You may also need to insert a flash as part of a feature activation code if your telephone is
connected to a PBX or Centrex system. To insert a flash into a number you are storing, press
FLASH
.
Each press of
FLASH
will insert a 600 millisecond (ms) flash, represented by an “f” in the display.
Note:
If 600ms is not an appropriate length for your installation, you may set a different value.
3.1.4.
Storing temporary tone dialing into memory
If your system is set to pulse dialing mode, you can store a temporary switch to tone dialing in a
memory location. You may, for example, wish to dial a number in pulse followed by an access code in
tone dialing. To insert “switch to tone” into a sequence you are storing, press the
* (TONE)
button. All
the following numbers in the sequence will automatically be dialed in tone mode.
3.1.5.
Storing one of the last five numbers dialed into memory
To store a dialed number into memory, press
REDIAL
. You may then press the
UP
or
DOWN
key to
scroll through the last five numbers dialed. Press the Directory key (#) and press Yes to save or No to
cancel when the desired number is displayed.
18
2750 User Guide Version 1.3
