Cortelco 2750 Owner'S Instruction Manual Download | Manualshive

Page: 41 / 61

background image

6.7.3.

Speakerphone

While the speakerphone is activated, press the up and down

VOLUME

buttons to set desired

speakerphone volume.

6.7.4.

Intercom Speaker

While using the intercom or receiving a page, press the up and down

VOLUME

buttons to set desired

intercom speaker volume. The speaker volume levels for the intercom and for outside calls are
independent of each other. You may, for example, set your speakerphone so that a caller’s voice will be
at a normal level, yet intercom pages will come through at a louder volume.

6.7.5.

Discrete alert

While the phone is on-hook and idle, press

HOLD

. Then press the up and down arrows of the

VOLUME

buttons to set desired discrete alert volume. There are 8 levels to select from. With each

press, the phone will ring once at the new discrete alert volume. The discrete alert volume setting
governs the volume of off-hook ringing, off-hook intercom ringing, the held call reminder, and the line
reserve alert.

6.8.

Voice Mail (Message Waiting)

The 2750 supports external Voice Mail indicators. The commercial telephone company will supply
either FSK or Stutter Dial tone. When using external VM, the LCD will display a message to alert you
that there is a message and what line it is on. Section 4.2.1 Message Waiting Line Selection will allow
you to set indicator to Line1, 2, 3, 4, or OFF. Section 4.2.2 Message Waiting Mode Selection will
allow you to set either FSK or Stutter Dial Tone as the signal type.
In most cases you will only set one telephone to receive the external message waiting signal. If you
have multiple external mail boxes then each box must be on a different telephone.
When you receive a message, your display will show the following.

6.8.1.

Accessing Messages

Dial the number for your voice mail service. You may wish to store this number in one of your phone’s
memory locations for easy access.

6.8.2.

Resetting MSG Lamp

If your MSG lamp continues to flash after you have retrieved your messages, you may turn it off
manually by following the following instructions:
a.

Press

MENU

. The display will read “

Phone Setting

”

b.

Press the

DOWN ARROW

until “

Message Lamp

” appears in the display.

c.

Press the soft key under

RESET

.

35

2750 User Guide Version 1.3

«
...
39
40
41
42
43
...
»

Summary of Contents for 2750






























































Reviews:

No comments

Related manuals for 2750

Brand: Panasonic Pages: 10

Brand: Logik Pages: 16

Brand: Interquartz Pages: 16

Brand: Hello Kitty Pages: 12

Brand: BT Pages: 51

Brand: Topcom Pages: 296

Cordless Phone with Digital Answering System and Caller ID

Brand: VTech Pages: 1

Brand: Panasonic Pages: 32

VB44210A - BUSINESS TELEPHONE

Brand: Panasonic Pages: 50

Brand: Panasonic Pages: 52

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 56

Brand: Panasonic Pages: 56

Brand: Panasonic Pages: 56

Brand: Panasonic Pages: 64

Brand: Panasonic Pages: 52

Brand: Panasonic Pages: 84

Brand: Panasonic Pages: 82

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands