Cortelco 2750 Owner'S Instruction Manual Download

Page: 26 / 61

Press

Down Arrow

repeatedly until “

Centrex Prefix

”

appears in the display

Press the soft key under

ENTER

. The display will show the currently stored Centrex prefix, or

indicate“

XXXXXXX

” if none has been stored.

Press the soft key under

CHANGE

Enter the desired Centrex prefix, up to seven digits.

Press the soft key under

SAVE

Press

MENU

to exit.

3.5.

Erase Numbers Stored in Memory

To erase all personal directory numbers stored in your telephone.
a.

Press

MENU

Press

DOWN ARROW

repeatedly until “

Advanced Setting

” appears in the display

Press the soft key under

ENTER

. “

Erase Memory

” will appear in the display.

Press the soft key under

ENTER

. “

Memory Dials

” will appear in the display.

Press the soft key under

ERASE

. After a brief pause, the display will read “

Erasing Done

”

3.6.

Erase Toll Restrictions

At station #01
a.

Press

MENU

Press

DOWN ARROW

repeatedly until “

Advanced Setting

” appears in the display

Press the soft key under

ENTER

. “

Erase Memory

” will appear in the display.

Press

DOWN ARROW

repeatedly until “

Erase Toll Restr

” appears in the display.

Press the soft key under

ENTER

Press the soft key under

ERASE

. After a brief pause, the display will read “

Erasing Done

”

3.7.

Erase All Feature Settings

To erase all the feature settings stored at a particular station and return that telephone to its original
factory settings.
a.

Press

MENU

Press

DOWN ARROW

repeatedly until “

Advanced Setting

” appears in the display

Press the soft key under

ENTER

. “

Erase Memory

” will appear in the display.

Press

DOWN ARROW

until “

Erase Settings

” appears in the display.

Press the soft key under

ENTER

Press the soft key under

ERASE

. After a brief pause, the display will read “

Erasing Done

”

Note

that when you erase all feature settings at a particular station, you do not erase the directory dial

numbers that may be stored in this station.

3.8.

Reset Default Settings

You may reset the 2750 software to the factory default. This will total remove any changes or stored
memory items. To reset the 2740, press

MENU, MUTE,MUTE,2,7,4,1

2750 User Guide Version 1.3

Summary of Contents for 2750






























































Search results

Summary of Contents for 2750

Reviews:

Related manuals for 2750

Brands by name

Popular brands

Cortelco 2750, Owner'S Instruction Manual

Search results

Summary of Contents for 2750

Reviews:

Related manuals for 2750

Brands by name

Popular brands