background image

To reserve a line
a. 

Press 

HOLD

.

b. 

Press the desired 

LINE 

button. The line indicator will turn from red to orange.

To cancel Line Reserve press the 

LINE

 button again. The line indicator will turn from orange back to 

red. If you do not go off-hook within 15 seconds after you are alerted, the line will become free again 
for others to use. Line Reserve will also cancel if you make or answer a call on another line.

6.13.

Call Privacy

See Section 2.9 for a description of Call Privacy and for initial programming instructions. To release 
call privacy during a single call press 

CONFERENCE. 

“Privacy Released” will appear in the display. 

Call privacy will be reactivated for the next call.

Note: 

Call Privacy is always on for intercom calls.

6.14.

Toll Restriction

See Section 2.8 for a description of Toll Restriction and initial programming instructions.

6.14.1.

 Toll Restriction Removal (Single Call)

a. 

Press 

HOLD 

button.

b. 

Enter the 4 digit toll restriction access code which was set at Station #01. If no code was set, the 
access code is the initial number set at the factory, which is “1234”.

c. 

The 

SPEAKER

 light will flash indicating that toll restriction is temporarily off, and you may 

make your call.

When you use this feature, Toll Restriction will be reactivated 10 seconds after you hang up. This will 
be signaled by a flash of the 

SPEAKER

 light. You may continue making unrestricted calls as long as 

you go offhook again within 10 seconds of hanging up your previous call.

6.14.2.

 Toll Restriction Removal (Single Station)

You may turn Toll Restriction ON and OFF at a telephone without affecting the Toll Restriction settings 
stored in that telephone. For example, you may wish to turn Toll Restriction off for some guests, or you 
may want Toll Restriction to be on only during certain periods. When you turn off Toll Restriction at a 
telephone using this feature, it will stay off until it is reactivated. To access this feature:
a. 

Press 

HOLD

.

b. 

Enter “*” or “#”.
i. * ... to turn Toll Restriction ON.
ii. # ... to turn Toll Restriction OFF

c.

Enter the 4 digit toll restriction access code which was set at Station #01. If no code was set, the 
access code is the initial number set at the factory, which is “1234”.

Note

: Turning Toll Restriction ON at a telephone will have no effect unless restrictions have been 

stored at that telephone.

6.15.

Timer

6.15.1.

Elapsed Call Time

The display automatically shows the elapsed time during a call.

37

2750 User Guide Version 1.3

Summary of Contents for 2750






























































Reviews: