© Corroventa Ltd.
2017.02
2 (15)
User Manual WS4 ES
Intended use
The Corroventa WS4 ES water separator is developed and intended for use during suction drying of
floating floors and other layered constructions and it has the capacity to remove not only water but
also particles and dust.
As all other Corroventa machines, the WS4 ES is of a very robust design, a prerequisite for a very long
life. Its housing is made of stainless steel and the built-in, submersible pump was selected for its
ruggedness and suitability for this very tough environment. The pump is attached to the lid which
also integrates all the electronics and the power cable. Thus, when the lid is removed, all that remains
is a very easily cleaned housing. Although physically much smaller and weighing only 20 kg, the WS4
ES has the same efficient three step filtering as its predecessor. Naturally, it is compatible with all
Corroventa turbines, old as well as new.
Features:
•
High capacity
•
Service friendly
•
Robust
•
Very low noise
Summary of Contents for WS4 ES
Page 1: ...WS4 ES WATER SEPARATOR USER MANUAL ...
Page 2: ......
