© Corroventa Ltd.
2017.02
12 (15)
Maintenance and service
Filter replacement
The air filter in the machine shall be regularly replaced, suitably for each new job or as soon as it is
dirty and/or clogged.
1.
Make the machine powerless, disconnect the power cable.
2.
Turn the knobs on the lid anti-clockwise and then remove the lid. Pull out the dirty filter and,
without any tools install the new one pushing it into place.
3.
Put the lid back on and lock it by turning the knobs clockwise.
Turn the knobs anti-
clockwise to loosen
the lid. Lift it out of
the machine.
Pull the filter inwards
to remove it. Push the
new filter in position
on pipe.
Sensors, pump stop
and, higher up, pump
start.
Overflow sensor
Summary of Contents for WS4 ES
Page 1: ...WS4 ES WATER SEPARATOR USER MANUAL ...
Page 2: ......
