© Corroventa Ltd.
2017.02
9 (15)
Use of WS4 ES with digital ES-family turbine
When using the WS4 ES water separator with a new ES family turbine, the power cable connection to
the WS4 ES can be supplemented with a system cable so as to allow for the turbine to count how
many cycles the WS4 ES has performed which is a good indication of how much water has been
removed. In addition to the counting of the cycles, the turbine also keeps track of time and date of
the last pump activation so that the user can get a good understanding of whether there is still
coming any free water out of the construction or not.
Function and indicator signals
To operate the WS4 ES and to understand its indicator signals it is beneficial to know the following:
When the machine is powered, the power switch is activated, a short flash of the indicator LED shall
be observed as indication of everything operating as intended.
If the machine detects water at start-up, it always runs the pump before it starts the turbine.
The switch for manual pumping will stop the turbine and activate the pump. When the machine is
emptied, it automatically resumes normal operation and thus, if a turbine or Kombi machine is still
connected, it will start again.
WS4 ES connected to digital
ES family Turbine with
system cable.
This connection is optional,
it does not have to be used.
Regardless of whether it is
used or not, the turbine
power cable shall always be
connected to the power
outlet of the WS4 ES.
Summary of Contents for WS4 ES
Page 1: ...WS4 ES WATER SEPARATOR USER MANUAL ...
Page 2: ......