manualshive.com logo in svg

CORRECT CRAFT 2008 2008 70141, Owner'S Manual

Share
Download
CORRECT CRAFT 2008 2008 70141 Owner'S Manual Download Page 50

Correct Craft, Inc.

2-4

FWMS Marking System

The middle of the channel is marked with RED and WHITE
vertically striped buoys; pass close to these buoys.

Spherical Safe Water Marker

Obstructions, channel junctions, etc. are marked with RED and
GREEN horizontally striped buoys.

A RED band at the top means the preferred channel is to the left
of the buoy; a GREEN top band means the preferred channel is to
the right of the buoy.

Day markers are colored and numbered the same as buoys. RED,
triangular day markers with even numbers mark the starboard side
of the channel. GREEN, square day markers with odd numbers
mark the port side of the channel.

SPHERICAL SAFE

WATER MARKER

KC−0430

RED

UNLIGHTED

BELL BUOY

LIGHTED BUOY

CAN BUOY

SPAR BUOY

NUN BUOY

KC−0420

Section 2

Nautique Ski Sec 2.qxd:Nautique Ski Sec 2.qxd  6/19/07  4:40 AM  Page 2-4

Summary of Contents for 2008 2008 70141





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands