Document : CS-SUP-MUTI-WPORTAPP-E02.sxw
5.1.4 - Time-out management
when sending a request with waiting of a response (Frame Exchange), the timeout relating to waiting of the
response frame, is given by parameter RADIO_USER_TIMEOUT (2 seconds by default).
The beginning of counting of this timeout depends on another parameter: RADIO_ACKNOWLEDGE.
If RADIO_ACKNOWLEDGE is active, then counting begins on reception of the acknowledgement from the
Request. On the other hand, if RADIO_ACKNOWLEDGE is inactive, then the counting of the
timeout begins directly after sending the request on radio medium.
•
Diagram of a Point-to-Point exchange
WaveCard user handbook
page 41 of 67
Delta 1 : RADIO_USER_TIMEOUT, with RADIO_ACKNOWLEDGE disabled.
Delta 2: RADIO_USER_TIMEOUT, with RADIO_ACKNOWLEDGE enabled.
Delta 1 = Delta 2
= RADIO_USER_TIMEOUT
