Document : CS-SUP-MUTI-WPORTAPP-E02.sxw
APPENDICE 5 : List of the commands of data transmission
CMD
NAME
DESCRIPTION
0x20
REQ_SEND_FRAME
Request to send a radio frame with the waiting for the radio response.
0x21
RES_SEND_FRAME
Response from the radio board to the frame emission (response to the request 0x20,
0x22,0x24, 0x26, 0x28, 0x2A )
0x22
REQ_SEND_MESSAGE
Request to send a radio frame without the waiting for the radio response.
0x24
REQ_SEND_BROADCAST_RESPONSE
Request to send a radio frame in response to a broadcast frame
0x26
REQ_SEND_POLLING
Request to send a radio frame with the polling mode.
0x28
REQ_SEND_BROADCAST
Request to send a radio frame in broadcast mode.
0x2A
REQ_SEND_BROADCAST_MESSAGE
Request to send a radio frame in broadcast mode without waiting for radio
response.
0x30
RECEIVED_FRAME
Received radio frame by the radio board.
0x31
RECEPTION_ERROR
Frame indicating error type detected at the issue of last exchange in point to
point or relaying mode.
0x32
RECEIVED_FRAME_POLLING
Received radio frame following a REQ_SEND_POLLING request
0x34
RECEIVED_BROADCAST_RESPONSE
Received radio frame following a REQ_SEND_BROADCAST request
0x35
RECEIVED_FRAME_RELAYED
Received relayed radio frame by the radio board .Reception of this command
is possible only if RELAY_ROUTE_STATUS(0x06) parameter is set.
0x36
RECEIVED_MULTIFRAME
Received radio frame in multi frame mode. Indicates that following frames
are pending.
0x37
END_MESSAGE_EXCHANGE
Frame indicating end of message exchange.This frame is returned only after
0x22
&
0x24 & 0x2A
Request command. Reception of this frame is
conditioned by the parameter EXCHANGE_STATUS value.
0x38
RECEIVED_BROADCAST_FRAME
Received a radio frame transmitted in a broadcast mode
WaveCard user handbook
page 67 of 67
