Coronis WaveCard 25mW, User Manual

Page: 66 / 67

Document : CS-SUP-MUTI-WPORTAPP-E02.sxw
APPENDIX 4 : List of the commands of parameters setting
CMD Name Description
0x40 REQ_WRITE_RADIO_PARAM
Request to update the radio parameters
0x41 RES_WRITE_RADIO_PARAM Response from the radio board to the radio parameters update
0x42 REQ_CHANGE_UART_BDRATE Request to update serial link Baudrate
0x43 RES_CHANGE_UART_BAUDRATE
Response from the radio board to the serial link baudrate update. Serial Link
Baudrate is updated once the exchange is ended
0x44 REQ_CHANGE_TX_POWER (1) Request to update radio board emission power
0x45 RES_CHANGE_TX_POWER (1)
Response from the radio board to the emission power update
0x46 REQ_WRITE_AUTOCORR_STATE
Request to update WAVENIS RF ASIC RSSI Threshold autocorrection
state
0x47 RES_WRITE_AUTOCORR_STATE
Response from the radio board to the WAVENIS RF ASIC
autocorrection state update
0x50 REQ_READ_RADIO_PARAM Request to read the radio parameters.
0x51 RES_READ_RADIO_PARAM Response from the radio board to a parameters reading.
0x54 REQ_READ_TX_POWER
Request to read radio board emission power
0x55 RES_READ_TX_POWER Response from the radio board to the emission power reading
0x5A REQ_READ_AUTOCORR_STATE
Request to read WAVENIS RF ASIC RSSI Threshold autocorrection
state
0x5B RES_READ_AUTOCORR_STATE
Response from the radio board to the WAVENIS RF ASIC
autocorrection state reading.
0x60 REQ_SELECT_CHANNEL Request to select the radio operating channel when FHSS is deselected
0x61 RES_SELECT_CHANNEL
Response to the channel selection request
0x62 REQ_READ_CHANNEL Request to read the radio operating channel when FHSS is deselected
0x63 RES_READ_CHANNEL Response to the read channel request
0x64 REQ_SELECT_PHYCONFIG
Request to select the RF medium physical mode
0x65 RES_SELECT_PHYCONFIG
Response to the physical mode selection request
0x66 REQ_READ_PHYCONFIG Request to read the RF medium physical mode
0x67 RES_READ_PHYCONFIG Response to the physical mode reading request
0x68 REQ_READ_REMOTE_RSSI
request to read RSSI level from remote equipment
0x69 RES_READ_REMOTE_RSSI Response to the read remote RSSI level request
0x6A REQ_READ_LOCAL_RSSI
Request to read the Wavecard RSSI level on an exchange with a distant
equipment
0x6B RES_READ_LOCAL_RSSI Response to the read local RSSI level request
0xA0 REQ_FIRMWARE_VERSION Request to read the radio board firmware version.
0xA1 RES_FIRMWARE_VERSION
Response from the radio board to the firmware version reading.
0xB0 MODE_TEST
Put the Wavecard in a selected test mode
(1) : These commands are accessible only on 25mW Wavecard radio board.
WaveCard user handbook page 66 of 67