ORDINARY MAINTENANCE
- 42 -
COROB™ D600 - D700 - D800TX
7.4 External cleaning
WARNING
NEVER USE WATER OR SOLVENT-BASED CLEANING PRODUCTS TO CLEAN THE MACHINE.
In case the colorant has poured inside the machine, do not try to clean; turn the machine off at once and
contact an authorized service center.
In case of paint spills, clean the machine immediately.
1. Disconnect power supply (chapter 5.6).
2. Clean coverings, panels and control devices of the
machine, to remove dirt, dust and any colorant
stains, using a soft and dry cloth, or slightly
moistened with a mild cleansing solution.
3. Connect power supply and switch on the machine
See the manufacturer manual for instructions on
cleaning the computer.
7.5 Cleaning the nozzle center
1. Open the Autocap using the command in the
management software.
2. Disconnect power supply (chapter 5.6).
3. Accurately clean the nozzles using a sharp tool;
remove any dried colorant residue delicately, to
avoid damaging the ends of the circuits.
4. Connect power supply and switch on the machine
(chapter 5.3); the Autocap closes automatically
during initialization.
5. Carry out Purge, using the command in the
management software.
