USING THE DISPENSER
- 31 -
COROB™ D600 - D700 - D800TX
6
USING THE DISPENSER
6.1
General warnings
Personnel in charge of these operations must wear the following personal protective
equipment.
DANGER
The machine must be used by a single operator. Unauthorized people who could reach or touch machine parts
during operation must not be admitted in the nearby area.
It is strictly forbidden to use the machine without protections or with any safety devices present on the
machine disabled, broken down, or removed. The panels must be kept closed at all times.
Do not, for any reason, place your hands in the dispensing area when running the machine, except for loading
and unloading the cans.
When handling cans, do not exceed the weight limits stated by the current regulations in force (kg 20 for
women, kg 25 for men).
6.2
At the beginning of the working day
At the beginning of each work shift, always carry out the following operations:
•
Check that the nozzle center is clean.
• (With humidifier system for solvent-based colorants or without humidifier system) Check that the sponge is
clean and saturated; if it is necessary to saturate, use only appropriate liquid (the choice of the liquid depends
on the nature of the colorants, and must be done directly by the manufacturer of the products used).
• (With humidifier system for water-based colorants) Check that the water in the bottle is not below the
minimum level.
•
Carry out system Initialization and Purge.
6.3
Running the machine
The operator is guided in running the machine by the management software, which displays the instructions to
be carried out and the actions performed by the machine.
Steps
Options
Reference
Make the selections from the management software
(selection of the product, formula and cansize).
Load the can in the machine and adjust the height of
the can shelf.
with semiautomatic shelf
with automatic shelf
chapter 6.3.2
with panel roll conveyor
chapter 6.3.3
Adjust can position with respect to the dispensing
center.
with can centering device
chapter 6.3.4
with Laser B.H.L.
chapter 6.3.5
Carry out punching of the can lid (optional).
with punching device
chapter 6.3.6
Via the software, enter the formula dispensing
command.
chapter 6.3.7
When dispensing is finished, remove the can and
proceed with another dispensing process.
