GENERAL INFORMATION
- 7 -
COROB™ D600 - D700 - D800TX
1
GENERAL INFORMATION
1.1
Purpose and use of this manual
Read this manual carefully before using the machine.
This manual, inserted in the product packing, contains instructions on the use and routine maintenance needed
to uphold the machine’s performance over time. The manual contains all information needed to correctly use the
machine and avoid any accident.
The manual is to be considered an integral part of the machine, and must be stored until it is fully dismantled.
The manual contains all information available at the time of preparation regarding the machine and any
accessories; for accessories, the manual includes any variations or changes that involve different operating
procedures.
Should it be lost or partially ruined, so that its contents can no longer be read in full, you must request a new
manual from the manufacturer.
If the images contained in this manual show the machine without the guards and/or employees
without personal protective equipment, it is only for the purpose to make clearer the discussion of
the issues.
Some of the illustrations in this manual were taken from prototypes; some details may differ on
machines in standard production.
1.1.1
Conventionally used graphics
Boldface
type is used to highlight notes or information of particular importance to a topic.
DANGER
Indicates a risk of personal injury.
WARNING
Indicates a risk of damage to the machine that could interfere with its operation.
Indicates a risk of damage to the machine that could interfere with its operation.
Indicates situations and/or operations that involve the management software installed on the computer.
Indicates situations and/or operations that involve the management software installed on the computer.
1.2
Definitions
OPERATOR
A person familiar with the methods to produce paints or similar products, trained and authorized to operate and
use the machine by its controls and to load and unload production materials with all safety devices installed
and enabled. He or she must work only in safety conditions and is allowed to carry out routine maintenance
operations.
MAINTENANCE TECHNICIAN/INSTALLATION TECHNICIAN
Specialist prepared and trained in a technical field (mechanical and electrical) and assigned by the manufacturer
to work on the machine to perform machine installation, adjustments, repair breakdowns or carry out
maintenance.
