SAFETY
- 20 -
COROB™ D600 - D700 - D800TX
3.6
Requirements of the installation site
Environment requirements for the site where the machine is to be used:
•
Clean and dust-free.
• With level and stable floor.
•
Fitted with a grounded power supply socket.
• Equipped with sufficient lighting to ensure good visibility from every point of the machine (light value not
lower than 500 Lux).
•
Ventilated to prevent the concentration of harmful fumes.
•
Temperature between 10 °C (50 °F) and 40 °C (104 °F) and relative humidity between 5% and 85%, without
condensation.
WARNING
The environment working conditions are strictly related to the type of colorants used (ask for information from
the paint manufacturer). The requirements indicated above are valid for the machine only.
Do not place the machine near heat sources or in direct sunlight. Also humidity sources should be avoided. The
machine must be used indoors only.
Environment conditions outside the values indicated (chapter 8.1) may cause serious damage to the machine,
especially the electronic equipment.
DANGER
When using
colorants containing volatile solvents
the room in which the machine is installed must be
spacious, with good ventilation (air exchange) and no type of parts must be leant against or stocked close to
the machine.
