Standard Recom m ended Procedure 003-1002-BEN | Issue 4 | January 2019 | Page 11 of 26
4.6
(OPTIONAL) Rem ove Housing Trunk Plat e
If cable entry st rain-relief is accomplished in a location ext ernal to the housing, the trunk plate may be removed
to allow more room behind the housing (Figure
16).
Step 1:
(For 4U housing only) Remove side panel from each side of the housing.
Step 2:
Remove any screw s holding the access panels to the housing.
Step 3:
Remove any screws holding the trunk plate to the housing.
Figure
16 — Rem ove Back Deck
