Standard Recom m ended Procedure 003-1002-BEN | Issue 4 | January 2019 | Page 10 of 26
Figure
14 – Inst all Trunk Cable w it h Keyhole Adapt er
4.5
Inst all Trunk Cables from Rear of Housing
If rear cable entry into the housing is desired or necessary, the backplates must be turned 180 degrees before
installing the cables.
Step 1:
Remove existing backplates by removing the four screws (Figure
15).
Step 2:
Turn the backplate 90 degrees as show n and reinstall the four screws.
Step 3:
Insert cradle feet into backplate as show n in Figure
13 or Figure
14 for your cradle type.
Figure
15 — Reorient Backplat e
