Coretec VCX-7401, Installation And Operating Instructions Manual

Page: 31 / 38

This command is used to set the SDP (RFC-2327) name information. The
parameter is an ASCII string with a limitation of 30 characters.
Default: Core Tec Communications, LLC
Example:
SAPNAME Main Street Camera #1
SAPPORT
This command sets the destination port for SAP packets. The port number is
defined in RFC-2974. It is unlikely that the user will need to change this setting.
Default: 9875
SAPUPDATE
Issue this command after changing the SAP parameters to update all devices listening to
SAP multicasts.
SNMP Settings
This command allows the encoder to set the SNMP trap receiver. You may add or
remove the receiver from the encoder.
Format:
SNMPMANAGER [ADD:REMOVE] <n.n.n.n> [abcdef...]
Example:
snmpmanager add 192.168.5.66 public
RWCOMMUNITY
This command sets the read/write community name. (The SNMP Manager must
know this Community name in order to “Get” or “Set” messages.) It allows the SNMP
manager to issue “Get” and “Get Next” messages as well as “Set” messages.
Format:
RWCOMMUNITY <abcdef…>
Example:
rwcommunity private
ROCOMMUNITY
This command sets the read only community name. (The SNMP Manager must
know this Community name in order to “Get” messages.) It allows the SNMP manager to
issue “Get” and “Get Next” messages only.
Format:
ROCOMMUNITY <abcdef…>
Example:
rocommunity public
31