Reboot Button
The reboot button will immediately shut down the device and reboot. If any
changes were made during the session and not commited, then they will not stay
in effect after reboot completes.
NOTE: This is good to use if the user has made many new configurations but
doesn't wish to keep them.
Open Manual
The open manual button is just a shorcut to open this manual.
View H264 Video
This button will open a new page where the H.264 video stream may be
viewed.
View MPEG4 Video
This button will open a new page where the MPEG4 video stream may be
viewed.
4. SNMP
Please refer to SNMP Commands for VCX-7401 Document.
Program Commands
IMPORTANT NOTES:
1. After entering one or more commands, it is necessary to enter COMMIT and REBOOT for
the new settings to take effect.
2. Typing “?” displays a listing of all commands.
3. The prompt will tell you if commands related to the encoder and decoder are applied to one
or the other. If the prompt is “Encoder>” then the command applies to the encoder.
Likewise, if the prompt is “Decoder>” then the commans applies to the decoder. The current
mode can be changed by typing MPEG4, H264 or DECODER at the prompt.
22
Summary of Contents for VCX-7401
