61
Info window
♦
Explanation of Parameter Cell is below.
Refer to the following description for the meaning of each symbol.
No. Name
Explanation
1
SP No.
Spindle No. to fasten the position.
2
Prg No.
CPS Program No. to be executed in the position.
3 Retry
Condition
Retry settings:
N: No Retry
RN: Only NG Work Position will be retried.
RG: All Work Positions under the same Group will be retried.
(“RN” or “RG” can be selected in the “Group Retry” area in the Sequence
Parameter window.)
4
Retry Prg No.
IPS Program No. for Retry.
If Retry Condition (#3) is “N” (No Retry), this value should be disregarded.
5 Number
of
Times
Number of execution times for Retry Program.
If Retry Condition (#3) is “N” (No Retry), this value should be disregarded.
6
Treatment of NG Work Position How to proceed with the program when fastening result is judged NG.
(1)
(2)
(3)
(4)
(5)
(6)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com