7
(617417440)
FM359 7/19
Access 800
™
Series
Locks
Keypad Programming Instructions
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2018
-2019
Corbin Russwin, Inc., an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
4
M800 Programming
User Location
Three digits - 001 through 100
(User numbers assigned at time of programming)
Transaction Descriptions
Will vary
Optional Equipment
Printer Paper (6 Rolls 794F189) used for infrared printers.
Infrared Printer 793F109 used to download the user and transaction type.
To Reset / Clear Transaction Log
99# Master Code*
Yellow LED blinks
76# 00000# 00000#
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
To Clear the Entire Memory and restore Factory default settings
99# Master Code*
Yellow LED blinks
46# 00000# 00000#
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks rapidly, slowly when complete
*
Yellow LED goes out
This deletes ALL Codes, including Master, Emergency and Supervisor. The Master Code is
set back to 1234*. Door Number to 0001 and Unlock Time to 5 seconds. If the Master Code
is not known, Factory Assistance will be required to clear the memory.
Call 1-800-810-WIRE (9473)
Status Indicators
•
No Green LED after code is entered once and 3 rapid beeps – Invalid Code (Three
attempts will lock out for 10 seconds with Yellow LED)
•
4 Long beeps after User code is entered - Low Battery.
•
4 Long beeps after User code is entered, 4 more long beeps - Voltage (batteries) too low
to operate. Enter Master Code or Emergency Code to gain entry.
•
1 beep after User Code entered – Disabled User
•
4 beeps after User Code entered – Deadbolt Thrown (Mortise Lock Only)
•
3 beeps after User Code entered – User Lockout
