13
(617417440)
FM359 7/19
Access 800
™
Series
Keypad Programming Instructions
Locks
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2018
-2019
Corbin Russwin, Inc., an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5
M801, M803, M804, M806 Programming
To Enable/Disable A User
99# Master Code or Supervisor Code*
Yellow LED blinks
56# 0# (Enable) or 1# (Disable)
(User No. 03-2000)#
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
To Delete A User
99# Master Code or Supervisor Code*
Yellow LED blinks
50# 0# (User Number 03-2000)#
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
To Clear the Entire Memory
99# Master Code*
Yellow LED blinks
46# 00000# 00000#
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks rapidly, slowly when complete
*
Yellow LED goes out
Status Indicators
•
No Green LED after code is entered once and 3 rapid beeps, but flashes after 3 consecutive entries
– Invalid Code
•
4 Long beeps after Standard code is entered - Low Battery
•
4 Long beeps after Standard code is entered, 4 more long beeps - Voltage (batteries) too low to
operate. Enter Master Code or Emergency Code to gain entry.
•
1 beep after User Code entered – Disabled User
•
4 beeps after User Code entered – Deadbolt Thrown (Mortise Lock Only)
•
3 beeps after User Code entered – User Lockout
•
Alternating Red/Green LED – Awaiting second entry of Code and Card, Tag, or Fob User
