10
(617417440)
FM359 7/19
Access 800
™
Series
Locks
Keypad Programming Instructions
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2018
-2019
Corbin Russwin, Inc., an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5
M801, M803, M804, M806 Programming
To Activate The RF FOB Function
Note: Press and hold for 3 seconds the button on the RF FOB. If the controller
beeps and the LEDs flash, the RF FOB function is enabled and this procedure
does not have to be completed. With the RF FOB function enabled the battery
life of the unit will be reduced.
Press the white reset button located in
the battery compartment and any front
keypad key at the same time and hold
for 1 second, then release buttons.
Yellow LED blinks
Enter code 1030#
Yellow LED blinks
1#
Yellow LED blinks
1# (to Enable) or 0# (to Disable)
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
Enter a Card, Tag, Fob and RF FOB User
99# Master Code or Supervisor Code*
Yellow LED blinks
50# (See Table Below)# (User Location 03-2000)#
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks slowly
Present Card, Tag, FOB or RF FOB
BEEP / Yellow LED blinks
*
Yellow LED blinks slowly
*
Yellow LED goes out
