29
¾
ᇹ
Enable Alarm Snapshot
ᇺ
When the sensor trigger events happened, system will send alarm
JPG image to specific client automatically. The client must be specified firstly and set its IP
address in “networ
k
setting”
¾
ᇹ
Preset channel
ᇺ
When the sensor is triggered, system will automatically preset dome as the
“PTZ preset position”, system must connect with a preset-supporting dome and set preset position
on the main interface.
¾
ᇹ
Output Set
ᇺ
System provides 2 channels on-off value for user to connect with bells, lights,
beepers etc. When sensor trigger event happens, system will output on-off value to attached
devices.
3.6.4. Sensor output setting
The function of alarm output can automatically trigger specific sensor output on-off value to
trigger alarm devices such as beepers. The setting is shown as following figure:
Figure 3-11 Camera output alarm setting
