Cooper Sound CS 208 V2, Operator'S Manual, Page: 8 / 39

MODEL CS 208 v2
MAY 2003
PIN OUTS
6
All XLR’s are wired pin 2 high.
XLR 3M
Pin 1 = Ground
Pin 2 = High
Insert
Pin 3 = Low
1/4” stereo jack Tip = Send
Ring = Return
Phones 1, 2, 3
Sleeve = Ground 1/4” stereo jack (max load = 25
Ω
per channel)
or direct out, prefader Tip = Left
(see appl. note AN 2A & 2B v.2) Ring = Right
Sleeve = Ground
Direct Out Comm. In.
(post fader) XLR 3F
1/4” mono jack Tip = Signal Pin 2 = High
Sleeve = Ground Pin 3 = Low
Pin 1 = Ground
(See application note AN 3 v.2 for multiple inputs)
Mix Bus in
DB9 1 =Ground
Returns
2 = D XLR 3F
3 = C Pin 2 = High
4 = A Pin 3 = Low
5 = B Pin 1 = Ground
(current input, see specifications)
Ext. Slate in
Outputs
XLR 3F
DB9 1 = Ground Pin 2 = Signal
2 = A Pin 3 & 1 = Ground
3 = B
4 = C
DB25 Balanced Outputs (Option)
5 = D Pin Pin
Ch.1 Hot 24 Ch.5 Hot 18
TQG 3M
Cold 12 Cold 6
Pin 1 = Ground Ground 25 Ground 19
Pin 2 = Signal
Pin 3 = N/C
Ch.2 Hot 10 Ch.6 Hot 4
Cold 23 Cold 17
TQG 5M
(roll) (See application note AN 1 v.2) Ground 11 Ground 5
Pin 1 = -10 v (Nagra)
Pin 2 = Stop (Nagra)
Ch.3 Hot 21 Ch.7 Hot 15
Pin 3 = Pause/Stop (DATs) Cold 9 Cold 3
Pin 4 = Common (DATs) Ground 22 Ground 16
Pin 5 = Record (DATs)
Ch.4 Hot 7 Ch.8 Hot 1
Cold 20 Cold 14
Ground 8 Ground 2