Cooper Sound CS 208 V2 Operator'S Manual Download Page 39

MODEL CS 208 v2

MAY 2003

LIMITED WARRANTY

37

1.

Warranty registration must be completed and mailed to Cooper Sound Systems, Inc. within 30 days of the date of

purchase.

2.

Cooper Sound Systems, Inc. warrants the materials and workmanship of this product for a period of one year from

the original date of purchase.  If any defects are found in the materials or workmanship, or if the product fails to

function properly (as per the specifications out-lined in the Operator’s Manual) within the specified warranty period,

Cooper Sound Systems, Inc. will repair or replace the product, at its option.  Please note the following:

A.

Modifications made by the customer or a non-authorized service center will invalidate the warranty.

B.

Damage caused to the unit by incorrect or improper usage (eg: utilization of incorrect power supply or

other improper connections) is not covered under this warranty.

C.

To obtain factory service, call: Cooper Sound Systems, Inc. (805) 772-1007 or Fax (805) 772-1098

D.

All returns and service requests must have prior authorization.

E.

Cooper Sound Systems, Inc. reserves the right to inspect any product which may be the subject of any

warranty claim, before repair or replacement is carried out.  Cooper Sound Systems, Inc. may, at its

option, require proof of the original date  of purchase (dated copy of original retail dealer’s invoice).  Final

determination of warranty coverage lies solely with Cooper Sound Systems, Inc.  Products which do not

meet the terms of this warranty will be repaired and returned C.O.D. with billing for labor, materials, return

freight, and insurance.  Products repaired under warranty will be returned via U.P.S. ground, freight 

prepaid, by Cooper Sound Systems, Inc. to any location within the boundaries of the U.S.A.  Outside the

U.S.A., the  products will be returned freight collect.

F.

This warranty is extended to the original purchaser, and to anyone who may subsequently purchase this

product within the specified warranty period.

G.

Cooper Sound Systems, Inc. does not authorize any third party, including any dealer or sales

representative to assume any liability on behalf of Cooper Sound Systems, Inc., or to make any warranty

for Cooper Sound Systems, Inc.

H.

The above warranty is the only warranty given by Cooper Sound Systems, Inc. and is in lieu of all other

warranties.  All implied warranties, including warranties of merchantability or fitness for any particular

purpose shall be strictly limited in duration to one year from the date of original purchase. Upon the

expiration of the warranty period (one year), Cooper Sound Systems, Inc. shall have no further warranty

obligation of any kind, expressed or implied.  Cooper Sound Systems, Inc. shall in no event be obligated

for any incidental or consequential damages that may result from any defect, or warranty claim of any

kind, expressed or implied.

I.

Cooper Sound Systems, Inc. reserves the right to modify the design of the equipment and to amend

specifications without prior notice. 

Summary of Contents for CS 208 V2








































Reviews: