MODEL CS 208 v2
MAY 2003
AN 2B v2 INPUT CHANNEL OPTIONS
28
Direct Out, Pre - Fader Level Boost
The nominal level of the Insert jack send/direct out, prefader, is -11dBu.
If the insert jack function has been changed to direct out, prefader, (see AN 2A), the level can be increased 9dB. (see
note 1)
An op. amp. (TL071) needs to be plugged into U4 on board A to enable this feature.
(This component is not normally installed to conserve current consumption.)
J5
• • • 1 Standard Gain
• • • 2 (see AN 2A)
A
B
• • • 1 Increased Gain
• • • 2
A
B
Move shunt on J5 to position A1.
Note 1:
Insert = direct out, prefader should be selected (A2).
ie: This increase in level should not be used for inserts as this will increase the overall gain of the mixer,
raising the minimum gain, & reducing headroom.
Note 2:
This modification should only be necessary for recorders that have +4 dBu inputs with no gain adjustment.
Also see 8 track balanced out option.
Summary of Contents for CS 208 V2
