MODEL CS 208 v2
AN 2E v2 - INPUT CHANNEL OPTIONS
MAY 2003
31
M/S Decode Option
See layout B.
One or more channels may be set up to decode an M/S mic configuration.
An op. amp. (TL071) needs to be installed on board B, U2 (on an even numbered channel).
Jumpers on J3 need to be moved to the right position.
Normal
Side
J3
J3
Switch ‘s’
(side)
Left = Normal phase (no decode).
Right = Reverse phase (M/S decode).
Use an odd numbered channel for the mid mic (cardioid/omni) & an even numbered channel for the side mic (figure of
eight). With both pan pots centered & equal gain for both channels, the M/S mic will be decoded to L/R stereo at 50%.
Mid = L + R (channel 1) (bus A + B or C + D)
Side = L - R (channel 2) ( bus A - B or C - D)
Any number of ‘even’ channels may be set up for this option.
Also see stereo channel CSST-208 for a dedicated 1 channel M/S decoder.
Summary of Contents for CS 208 V2
