www.cooperbussmann.com/wirelessresources
Cooper Bussmann 5073E-T Managed Ethernet Switch User Manual
45
Rev Version 1.1
Speed/Duplex
You can choose a port speed setting, or choose Auto Negotiation for the port
to negotiate the speed. The port speed options vary depending on the port.
For port 1-6 and port 8, the options are 100 FULL, 100 HALF, 10 FULL and 10
HALF. For port 7, 9, and 10, the options are 1000 FULL, 1000 HALF, 100 FULL, 100
HALF, 10 FULL, and10 HALF.
NOTE The Speed/Duplex option applies only to the RJ-45 interface.
Flow Control
Flow control determines whether the receiving node sends feedback to the sending
node. Three options are available:
•
Disable
—Disables flow control capability.
•
Symmetric
—Flow control is determined by auto-negotiation, and is only used
when both linked ports have flow control enabled.
•
Asymmetric
—Flow control is always active, regardless of whether the linked
partner port is enabled.
Alias
Allows you to add a description to let the manager know what device is connected
to the port.
Auto Detect 100/1000
When enabled, automatically detects the SFP module speed of the SFP port.
Apply
Click to apply the settings.
Port Status
The Port Status page displays the status of port configuration settings. To display this page, choose
Configure-->
Port
-->
Status
.
Figure 46 Port Status
Port Statistics
The Port Statistics page displays the real-time packet transfer status for each port. You can use this information to
plan and implement the network, or to troubleshoot a problem when there are collisions or heavy traffic.
To display port statistics, choose
Configure
-->
Port
-->
Port Statistics
.
