www.cooperbussmann.com/wirelessresources
Cooper Bussmann 5073E-T Managed Ethernet Switch User Manual
31
Rev Version 1.1
IP Address
Enter a static IP address to the switch from the subnet address range that the
network is using. If the DHCP Client option is enabled, the switch is configured as a
DHCP client. The network DHCP server will assign the IP address to the switch and
the switch displays it in this column. The default IP address is 192.168.1.88. You can
also choose an IP address manually when the DHCP Client option is disabled.
Subnet Mask
Enter the subnet mask of the IP address. You need to specify the subnet mask if the
DHCP Client option is disabled.
Gateway
Enter the network gateway for the switch. You need to specify the gateway if the
DHCP Client option is disabled. The default gateway address is 192.168.1.254.
DNS1
Enter the primary DNS IP address.
DNS2
Enter the secondary DNS IP address.
Apply
Click to apply the settings.
6.4.5 Syslog
Syslog Configuration
The Syslog (system event log) may be sent to the client only, server only, or both the client and server. The type of
events that are issued to the client or server depends on the system event selection on the System Alert - Event
page (see “System Alert Event”).
To configure the Syslog, choose
System
-->
Syslog
-->
Configuration
.
Figure 28 Syslog Configuration Page
Syslog Mode
Select the system log mode:
•
Client Only
—The system event log will only be sent to this interface of the
switch.
•
Server Only
—The system event log will only be sent to the remote system log
server with its IP address assigned.
•
Both
—The system event log will be sent to the remote server and this interface.
•
Disable
—No system event log is generated or sent.
Syslog Server IP
Address
When the Syslog Mode option is set as “Server Only” or “Both,” enter the system log
server IP address to which the log will be sent.
Apply
Click to apply the settings.
