www.cooperbussmann.com/wirelessresources
Cooper Bussmann 5073E-T Managed Ethernet Switch User Manual
21
Rev Version 1.1
C
hapTEr
5 - CONSOLE-BaSED MaNaGEMENT
The 5073E-T Managed Ethernet Switch supports a CLI command interface that can be accessed by connecting the
switch to a terminal or to a PC running a terminal emulator. This chapter describes how to connect and log onto the
Console port (see Figure 3). Refer to “Appendix B - COMMAND SETS” for command descriptions and examples.
5.1 Connecting to the Console Port
A RS-232 to RJ-45 connector cable is supplied with the switch (Figure 16). Connect the RS-232 connector to PC
or terminal and the RJ-45 connector to the console port of the 5073E-T switch. The connected terminal or PC must
support a terminal emulation program, such as HyperTerminal or PuTTY.
Figure 16 RS-232 TO RJ-45 Connector
Figure 17 DB-9 Pin Female
5.2 Pin Assignment
DB-9 Connector
RJ-45 Connector
NC
1 Orange/White
2
2 Orange
3
3 Green/White
NC
4 Blue
5
5 Blue/White
NC
6 Green
NC
7 Brown/White
NC
8 Brown
