Unavailable
Drive is connected to the second port of the
CoolMax CD-320 , but the host system is not Port
Multiplier aware.
None; the drive cannot be
accessed from a non-PM
aware host.
Orange
Rebuilding or
Verifying
Drive is being rebuilt or the rebuild is being
verified. The percentage complete also appears.
No action is needed; wait
for the rebuild or verify
operation to complete.
Light
Blue
New drive
New drive was installed.
No action is needed.
Purple
Wrong slot
Mismatched
Serial #
and
Expected Serial #
because a drive is installed in the wrong bay.
Install the correct drive
into the bay.
Monitor Temperature
The CoolMax CD-320 uses the following colors to indicate temperature status inside the
appliance.
Table 16
-
Color Codes for Temperature Status
Color
Definition
Resolution
Green
Temperature is normal
Yellow
Temperature is greater than 40º
Celsius (104º Fahrenheit)
Remove objects that interfere with airflow around the
CoolMax CD-320.
Red
Temperature is greater than 45º
Celsius (113º Fahrenheit)
Ensure constant airflow around the CoolMax CD-320. If
there is no airflow, replace the fan.
Identify the drive causing the temperature increase and
replace it.
Note: If no temperature sensor is installed, a value of “n/a” will appear.
Monitor Fan Status
The CoolMax CD-320 uses the following colors and values to indicate fan status.
Table 17
-
Color Codes for Fan Status
Color
Value
Definition
Resolution
Green
Normal
Both system and power supply fans are functioning within
limits.
None required.
Red
System
The system fan is not spinning or is spinning slower than
expected.
Contact point of sale
for repair.
