11
10.3.3 Connecting the
G2
to your TV
Using the Video Out cable supplied to connect your
G2
to a TV or VCR.
1. Connect one end of the Video Out Cable to the Video port on your
G2
.
2. Connect the other end of the cable to the video input socket normally at the back of your
G2
.
Selecting NTSC or PAL Video Format
Before you can view images on your TV, you need to identify first what system your TV uses. If your TV is with NTSC system,
set your
G2
to NTSC. If your TV is with PAL system, set your
G2
to PAL. Refer to the Broadcasting System Table on Section
17 for international settings.
Important Notes:
When your
G2
is connected to a television, the current state of the NTSC/PAL video output setting is shown in the LCD display. To switch from one
setting to the other, unplug the TV video cable from your
G2
, then use the Feature and Change buttons to set the desired format.
10.3.4 Viewing Your Images
After properly connecting your
G2
to a TV or VCR, you can start viewing your images.
MAIN MENU
REVIEW
SLIDE SHOW
DELETE ALL
INFO
FORMAT
LANG
TIME OUT
RESTORE
SAVE
1. If you connected your
G2
to a VCR using the video cable included.
2. Turn on our VCR and then switch your TV to Video channel. Remember to switch ON your
G2
.
After connected the
G2
to a VCR or TV, the Main Menu will be displayed on the TV screen.
• Review Mode
When your
G2
is connected to a TV set, all the images in the memory can be reviewed. When
main menu is displayed on the TV screen, you can select “Review” mode by using the next/
previous image button to scroll through it. Press the shutter button when the arrow lands on
the “Review” mode. Pressing the Next/Previous image buttons will scroll through the images in
memory in the order in which they were taken.
Important Notes:
If movie clips are stored in
G2
, each clip will be represented by the first frame of video.
• Slide Show Mode
During image review on TV, the Slide Show Mode can be used to automatically sequence through all of the images in memory,
starting with the oldest, to the newest. To use the “Slide Show” mode, simply press next/previous image button to scroll
through the main menu until the arrow lands on the “Slide Show” mode. Press the shutter button to confirm.
• TV Info Display
Info Display shows information about your
G2
on TV, including the firmware version number,
and the amount of memory in
G2
. This information is often useful for technical support
purpose.
To enter Info Display, press the previous/next image button until the arrow lands on the
“INFO” mode, press shutter to confirm. The Info Display will appear on the TV. Press
shutter button to return to Main Menu.
INFO
BATTERY VERY LOW
VERSION 3.000
MEMORY
USED
80KB
FREE
1440KB
SIZE
1523KB
