Cool Energy EcoStore CE-ES200, Manual

Page: 6 / 52

Cool Energy - EcoStore
EN
6 | P a g e
1 GENERAL NOTICE
1.1 Field of use
The heat pump water heater for the production of hot water is only intended to be used for sanitary
water heating, without exceeding the usage restrictions specified herein. To this purpose it must be
hydraulically connected to a sanitary water delivery network. It requires a power supply to operate.
Never use the heat pump for any purposes other than those specified herein. Any other use is to be
deemed as inappropriate and forbidden.
The manufacturer cannot be held responsible for any installation errors and inappropriate equipment
use.
1.2 Product nameplate
– EcoStore CE-ES200 / CE-ES300
1.3 Safety Precautions
The purchaser shall take care of the installation. The manufacturer shall not be liable for any damages
caused by wrong installation and / or non-compliance with the instructions contained in this use and
maintenance booklet, and in particular with those prescribing that:
•
the electrical connection must comply with the provisions specified in the relevant paragraph.
•
the supplied nylon electrical protectors must be properly installed.
•
“the hydraulic safety unit” must be properly installed, intact and in good working order.
•
installation and maintenance must be performed by qualified personnel, in compliance with
the building regulations in force.
•
before starting any maintenance or repair operations on components containing any cooling
fluid, a qualified technician must remove an appropriate amount of the latter, to ensure the risk-
free execution of the operations in question. The refrigerant must be handled and disposed of
in compliance with the relevant regulations and must not be dispersed into the environment!
(The R134a refrigerant is CFC-free, not flammable and not harmful for the ozone layer);
•
the maintenance regulations must be observed.
•
the equipment must be installed in an appropriate room (to avoid being exposed to frost)
•
the maximum overpressure, when using the tank, must be respected.
•
the maximum temperature, when using the tank, must be respected.
CAUTION! FAILURE TO COMPLY WITH THE ABOVE PROVISIONS WILL RESULT IN THE
CANCELLATION OF ANY WARRANTY RIGHT.
This equipment complies with the provisions contained in the EEC Directives in force.