Cool Energy EcoStore CE-ES200, Manual

Page: 16 / 52

EcoStore - Heat pump water heater
EN
16 | P a g e
CAUTION!
•
The equipment must be installed in compliance with current building
regulations.
•
Engineers installing the hot water heat pump must be qualified to do so.
•
Observe the safety regulations.
•
The installation environment and the electrical and hydraulic systems the
equipment shall be connected to must comply with the regulations in force.
•
You need to install the equipment at the prescribed distance from the room walls
and ceiling, to ensure proper operation and for easy maintenance
•
The floor on which the equipment is to be installed must be able to bear its weight.
•
The equipment ventilation openings must not be obstructed.
•
The chosen environment must be suitable for the equipment IP degree, in accordance
with the regulations in force.
•
If possible, install the equipment in a room allowing to exploit the excess heat
generated by tumble-driers, refrigerators, freezers, etc.
•
Air must be neither excessively purified nor too contaminated with dust.
•
There must be a black water drain, with a syphon to eliminate condensation.
CAUTION! The equipment is not intended to be used by any persons ( including children)
having reduced sensory or mental faculties, or lacking experience or knowledge, unless
they are under the supervision of a person in charge of their safety, or they have received
proper instructions regarding equipment usage.
3.1 Hydraulic connections
The assembly of the safety valves must be done in conformity to the G3 regulations in force.
We recommend the integration of a filter in the cold-water supply pipes.
We recommend that you install the equipment close to the main hot water draw off point, to
prevent heat dispersions along pipe work, and if possible, near a drain, for easier emptying and
condensate discharge.