Cool Energy EcoStore CE-ES200, Manual

Page: 30 / 52

Heat pump water heater
EN
30 | P a g e
4.5.6 Vacation mode
Method for Vacation mode setting:
Enter Vacation setting. Icon will flash.
Icon will be lightened and will
show the last setting vacation days.
Set vacation days. The day
’s range is 1~99
days.
Confirm Vacation setting and quit out. The
unit will immediately go into Vacation mode.
In vacation mode, the setting target water temperature is 15°C as default and will show the
remaining vacation days. On the last day of vacation, unit will automatically start dis-infect function,
and automatically reset the target temperature to the last one before vacation. If unit has already
been under vacation mode or OFF, press will lead to show invalid icon on the
display.
4.6 Combination button
ICON DESCRIPTION
Clear error code
+
Press the two buttons at the same time
to clear all stored error & protect codes,
and the buzzer will buzz one time.
Query mode
+
Press the two buttons at the same time
for 1sec to go into query mode.
Under query mode user can check unit
setting & running parameters by
pressing
circulaty. Press button
for 1s or no button operation
for 30s, then quit query mode.
4.7 Auto-restart
If electricity power failes, unit can memorize all setting parameters, unit will be back to the previous
setting when power recover.
4.8 Screen auto lock
If there is no operation of buttons for 30s, screen will be locked (extinguished) except for error
code and alarm light.
Press any button will unlock the screen(lighten).