Cool Energy EcoStore CE-ES200, Manual

Page: 20 / 52

EcoStore - Heat pump water heater
EN
20 | P a g e
3.4 Electrical connection
WARNING: The equipment is already factory-wired and is equipped with a 3-core flex for
the connection to an outlet having appropriate electrical characteristics.
Verify that the mains voltage complies with the value specified in the label applied on the
equipment, and that the mains can supply the specified power.
To disconnect the equipment from the mains you need to use a two-pole switch complying with
the EN standards (contact opening 3mm, preferably equipped with fuses). The connection must
be established by inserting the plug into the appropriate outlet or hard wired to a switch.
Connections must comply with
BS7671:2018 or the regulations in force.
WARNING: Switching on the equipment when it is not filled with water will seriously damage
the refrigerating units and the electrical element.
WARNING: If the supply cable is damaged, it must be replaced by the manufacturer or by
its technical support service, or by a person having a similar qualification, to prevent
any risk or danger.