Page 7 of 15
Note: Before slicing the loaf, use the hook to remove out the Kneading blade hidden on the
bottom of loaf. The loaf is hot, never use the hand to remove the kneading blade.
.
Special introduction
1
、
For Quick breads
Quick breads are made with baking powder and baking soda that activated by moisture
and heat. For perfect quick breads, it is suggested that all liquids be placed in the bottom
of the bread pan, dry ingredients on top. During the initial mixing of quick bread batters
and dry ingredients may collect in the corners of the pan, it may be necessary to help
machine mix to avoid flour clumps. If so, use a rubber spatula.
2
、
About Ultra fast program
The bread maker can bake loaf within 1 hour with ultra fast program. These 2 settings can
bake bread in 58 minutes
，
the bread is a little more dense in texture. Ultra fast I is for
baking 1.5LB bread while Ultra fast II is for 2.0LB. Please noted ingredient of water
should be hot water in the range of 48—50
℃
, you must use a cooking thermometer to
measure the temperature. The water temperature is very critical to the performance of
baking. If the water temperature is too low the bread will not be rise to expected size; if
the water temperature is too high it will kill the yeast prior to rising, which also will
largely affect the baking performance.
.
Cleaning and Maintenance
Disconnect the machine from the power and let it cool down prior to cleaning.
1.bread pan: Rub inside and outside with a damp cloth. Do not use any sharp or abrasive
agents for the consideration of protecting the non-stick coating. The pan must be dried
completely prior to installing.
2.kneading blade: If the kneading bar is difficult to remove from the axle, In such an event
fill the Container with warm water and allow it to soak for approx.30minutes.The
kneader can then be easily removed for cleaning. Also wipe the blade carefully with a
cotton damp cloth, Please note both the bread pan and kneading blade are dishwashing
safe components.
4. lid and window: clean the lid inside and outside with a slightly damp cloth.
5. Housing: gently wipe the outer surface of housing with a wet cloth. Do not use any
abrasive cleaner to clean as this would degrade the high polish of the surface. Never
immerse the housing into water for cleaning.
6. Before the bread maker is packed away for storage, ensure that it has completely cooled
down, is clean and dry, and the lid is closed.
Introduction of bread ingredients
1. Bread flour
Bread flour has high content of high gluten (so it can be also called high-gluten flour
which contains high protein), it has good elastic and can keep the size of the bread from
sunken after rising. As the gluten content is higher than the common flour so it can be
used for making bread with large size and better inner fiber. Bread flour is the most
