28
d) Confirm by pressing Smart Key
.
e) Confirm “Yes” with Smart Key
.
f) The Program Protection icon
appears.
g) The display shows the nominal settings for the selected program,
cooking plan, or recipe.
h) Press the Start/Stop
key.
i)
The Combi will start with Program Protection activated.
j)
The energy optimization unit cannot intervene during active operation of the Combi.
B. TEST
PROCEDURES
1. Function
Test
a. SELECT the Superheated Steam cooking program:
b. Press the Combi mode key
.
c. Press the Temperature key
.
d. Turn the Selector Dial
6019002_00
D
to set the temperature to 150°C / 302°F.
e. Press the Time key
.
f.
Set the time (10 minutes) with the Selector Dial
6019002_00
D
.
g. Press the Start / Stop key
.
h. The Program will start and the display will show the nominal oven temperature and
time remaining.
i.
STEAM GENERATOR Models: The heating element for the oven heat exchanger
and the heating element for the steam generator turn on, and the program runs.
j.
ALL MODELS: the program in step 1 will run.
k. The Signal Tone will sound and program will end when set time has elapsed.
l.
Press the Start / Stop key
or carefully open the door.
2. EMPTY and RINSE the Steam Generator:
a. Press Smart Key
.
b. Use the Selector Dial to select “Manual steam generator rinse”
.
c. Confirm with Smart Key
.
d. Steam generator will rinse.
e. Total time 8 – 12 minutes, depending on model.
3. RUN a Semi-Automatic Cleaning Cycle:
a. Close the door.
b. Turn ON the Combi with the ON / OFF key
.
c. Bypass (answer “No”) Automatic Steam Generator Rinse, if necessary.
d. Press Smart Key
.
A variety of icons appear in the display.
e. Select
Cleaning (brush icon) with the Selector Dial
6019002_00
D
.
f.
Confirm selection with Smart Key
.
g. Answer prompt “Yes” with Smart Key
.
h. The brush icon
lights and the nominal values for the program are displayed.
Summary of Contents for OGB-20.10
Page 4: ......
Page 27: ...21 Figure 6 Figure 4 7Figure 5...