Convotherm OGB-20.10, Installation And Maintenance Instructions Manual, Page: 25 / 42

19
8. Moving a Combi to its Operating Location
a. Transport the Combi on a pallet.
b. Keep the Combi UPRIGHT.
c. The packing list is under the top of
the packing carton (1 on Fig. 1).
d. Remove all cartons, packing
material, documents, shelves,
loading trolley, etc. from the oven
chamber.
e. Remove the Combi from the pallet.
1) Note the weight of the units in Table 2-1.
2) Be sure the lifting forks of a forklift or low lift truck are in the correct position
before picking up the Combi. See Figure 2 and Figure 3.
3) To lift units with a forklift, low lift truck, or hand truck: place wooden spacers between
the feet of the Combi (Fig. 3).
4) Stay to the right of the Drain (A) and the Overflow (B) on Figure 3. See Table 2-2.
5) Keep the Combi level! Do not tip!
TABLE 2-2 B AND A FROM HAND SHOWER SIDE
STEAM GENERATOR
MODEL
INJECTOR MODEL DIMENSION B
FROM HAND
SHOWER SIDE IN
INCHES
DIMENSION A
FROM HAND
SHOWER SIDE IN
INCHES
OGB-6.10 OGS-6.10 13 5/16 11 1/4
OGB-6.20 OGS-6.20 14 3/4 12 3/4
OGB-10.10 OGS-10.10 13 5/16 11 1/4
OGB-10.20 OGS-10.20 14 3/4 12 3/4
OGB-12.20 OGS-12.20 14 3/4 12 3/4
OGB-20.10 OGS-20.10 13 5/16 11 1/4
OGB-20.20 OGS-20.20 14 3/4 12 3/4
2
A
B
3
BOARDS
B
A
Figure 2
Figure 3
1
Figure 1