Convision M1600, User Manual

Page: 94 / 159

90
z
Step 1: Select the types of System Events to trigger DO (Alarm output) device.
Each row in the System Event->DO Menu represents one System event type and
each column shows one DO device. Click any row in the menu to select System
event type and tick the square icons in each column to select the DO (Alarm
Output) devices to be triggered.
z
Step 2: Click “ OK ” tab when you have done the setting.
z
Step 3: Besides the setting in this menu, you should have further configurations of
DO (Alarm Output) device to let this function work. . Please refer to Chapter 5-4-2
about setting of DO (Alarm Input) device.
(5) Interval: Set alarm notice interval and click “ Next” tab to have detail configurations.
The interval can be set from 1 second to 86400 seconds (1 day).
5-4-2 Alarm Device Configuration
Besides the setting in Chapter 5-4-1 for each Alarm Rule, you should have further
configurations for the alarm devices including DI (Alarm Input), DO (Alarm Output), E-Mail
server, FTP sever and GSM Modem for SMS. Click “ Configure” tab to enter the configuration
of alarm device.
(1) Configuration of DI (Alarm Input) device
Click the tab of “DI” and it will show the menu of “DI” configuration. Each row represents DI
device. Click the “Status” column in any row and it will pop up the three Status types for your
selection.