16
continually displayed in “
Zoom-in Window
”. If yes, the zooming channel will keep displaying
in “
Zoom-in Window
” for three seconds and then, will be replaced by any channel waiting for
zooming. If DVR detects more than one motion or alarm channels simultaneously, the zooming
rule will be as below,
z
The current zooming channel will be the first priority for zooming in again for another
three seconds and others will stay in their positions and be marked in red frames to wait for
zooming in after three seconds. However, the max zooming time for the same channel is
nine seconds. After nine seconds, even DVR detects motion or alarm on this channel, it
will not be popped up to the
Zoom-in Window
again until there are no other concurrent
motion/alarm channels and other channels with motion/alarm will replace it to be popped
up in
Zoom-in Window
according this rule.
z
If the channel stayed in it’s position waits for popping up but motion/alarm on this channel
disappears during the waiting time, it will not be zoomed in and the red frame marked in
this channel will disappear.
z
If DVR doesn’t detect the current zooming channel with motion or alarm again, the first
priority of the zooming-in channel in waiting list is the one of which channel number is the
smallest. For example, if DVR detects concurrent motions or alarms on channel #3 and
channel #4, the channel #3 will be zoomed in to the
Zoom-in Window
firstly for three
seconds and the channel #7 marked in red frame will keep to stay in it’s position waiting
for zooming in after three seconds.
3-1-3-2 Zoom in a Specific Channel
If you want to focus on a specific channel, you can set up just to zoom in that channel. In the
Event-to-Zoom mode, click any channel you only want to zoom in and this channel will be
popped up to the
Zoom-in Window
immediately marked in
yellow
color frame and the original
position of this channel will be replaced by a
“locked picture”
legend. In this configuration,
even DVR detects other channels with motions or alarms, these channels will not be popped up
to the
Zoom-in Window
but just stay in their positions marked in red color frames. You can
click the
Zoom-in Window
to cancel the configuration of “
Zooming in a Specific Channel
”.
Summary of Contents for M1600
